en-USit-ITde-DE
Wednesday, September 19, 2018

Automatic solid Measure machine programming
Measure cycles

Pre set and quality control of electrodes and work pieces

for Tool Makers, mold & Mold Makers

 

PCamMms

The CMM programming is one of the bottlenecks in the production process.

The increased demand for small batches of parts very accurate and precise increases the need to measure in a simple and efficient the particular products. The measuring machine PCam allows standardizing the measurement process allowing the customer to be efficient and competitive. The unit of measurement is usually considered the most expensive of all the production cycle. With the software CMM PCam everything is reduced to defining the measuring points on the solid piece and everything else to PCam. Importing solid STEP, IGES, SAT and _XT and visual programming CAD measuring cycles.
  • FLEXIBILITY
  • GRAPHICS INTERFACE
  • UNIQUE STRUCTURE FOR PROGRAMS GEOMETRIC AND SURFACE
  • WINDOWS WITH IMPLEMENTATION OF REMOTE UPDATES
  • ALGORITHMS  CERTIFICATES FROM INTERNATIONAL INSTITUTION OF METROLOGY
  • GRAPHIC REPRESENTATION OF THE MEASUREMENT
  • GRAPHIC REPRESENTATION OF ERRORS
  • OPERATOR DIALOGUE AND MULTILINGUAL REPORT
  • AUTOMATIC PADS AND PARTS FOR EROSION

Report

Form to obtain the measurement report in PDF, HTML, RTF, XLS, CSV, TXT, and can be sent via email. Contains the image of the element measured with the values ​​of tolerance and out of tolerance.

I++

Connector to remotly drive the I++ software

PCDmis

Connector to remotly drive the PCDmis software

UCC1-2

Connector to remotly drive the UCC1/2 software


EQC

Automatic with management, waste and quality electrodes. Checking and comparing dimensional solid electrodes: data points to be checked, according to the specifications, the module allows the automatic quality control electrode of the CMM.

Gap

Based on preset measurement the REAL GAP,done on electrode base, is automatically computed and changed dynamically in the technology for the machine so as to optimize the erosion

WQC

Allows you to read the points defined on the solid piece and according to the diameter of the probe automatically discard those not reachable. Then generates the measuring program, the CMM must 'run to measure all the required points.

USoft

Connector to remotly drive the USoft software

EPS

It allows you to preset manually or automatically an electrode on the CMM. Independent of the type of CMM.

Link PCDmis

Vision (pre set)

Web Camera take picture of the work pice on the Pallet and use data to pre set it on the CNC machine.

Export WGL

Export the geometry in 3D HTML5 format.

CMM-OS

Connector to remotly drive the Zeiss CNC
Products   |   Support   |   Company
Copyright 2000-2018 PCam S.A.